Minimum Cost: $27.50 per ton of basic landscaping crushed stone when 23 or more tons are purchased at one time.
Crushed concrete costs $11 to $53 per ton, around $16 to $75 per cubic yard, and $1 to $3 per cubic foot, with prices depending on the quantity. Leftover concrete and broken asphalt get crushed and recycled, which is a cheaper and more eco-friendly solution for gravel driveways.
Beside above, how much does 3/4 crushed stone cost? Product & Price List
|Aggregate||Yard Pick-up Price* (per cubic yard)|
|3/4″ Crushed Stone||$25.00|
|1 1/2″ Crushed Stone||$23.00|
|3/4″ Crushed Gravel||$20.00|
Moreover, what is crushed brick used for?
Crushed Bricks are a richly coloured, high-end decorative product used for landscaping. yet permeable surface. 7mm minus is a product that includes variations of crushed brick materials including dust up to 7mm in size. It compacts well so can be used to create beautiful paths and driveways.
How much does a ton of 57 stone cost?
#57 Granite Gravel—$52 per ton Typical construction, driveway, and drainage gravel.
What is the cheapest driveway surface?
Aggregate, or gravel, is the cheapest and most durable of these four common driveway materials.
Is crushed concrete good for a driveway?
Crushed Concrete driveways are a much more cost-effective driveway solution compared to gravel driveways, regular concrete driveways, or asphalt driveways. With benefits like the price, sustainability, and the fact that it can never crack and require a repair, crushed concrete is a great driveway option.
Does crushed concrete harden?
Crushed Concrete: A fantastic driveway stone, hardens and compacts over time. Easy to install and long lasting. The product is run through magnets to remove most of the non-cement pieces from the recycling process.
What is crushed concrete called?
When structures made of concrete are demolished or renovated, concrete recycling is an increasingly common method of utilizing the rubble. Concrete aggregate collected from demolition sites is put through a crushing machine.
How much crushed concrete do I need?
To figure out the how many tons you will need is not hard to do. You will have to know that the standard weight contractors use for crushed stone is 2700 pounds per cubic yard. Multiply the number of cubic yards by 2700 and divide by 2000. This value is the number of tons that you will need.
Is crushed concrete good base?
Essentially, the first advantage of crushed concrete aggregates is that they “lock up” well as a road base and can offer a superior load transfer when laid down over weaker subgrade. The road base foundation that crushed concrete can provide is strong and sturdy, and it will hold up for years to come.
Is crushed asphalt cheaper than gravel?
Homeowners appreciate the sleek appearance of an asphalt-paved driveway at a lower cost than concrete or paver surfaces. Flexible in extreme climate conditions. Asphalt driveways typically cost $2 – $5 per sq foot to install – more than gravel, but much less than many other options. Long lifespan.
How many tons does a dump truck hold?
Transfer dump trucks typically haul between 26 and 27 short tons (23.6 and 24.5 t; 23.2 and 24.1 long tons) of aggregate per load, each truck is capable of 3–5 loads per day, generally speaking.
How do I calculate how much crushed stone I need?
In the construction world, most materials are measured in cubic yards. Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This will tell you how many cubic yards of crushed stone you need. When using this equation, make sure all of your measurements are in feet.
How much will a ton of gravel cover?
Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.
How many tons of gravel do I need?
Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.
Is crushed rock good for driveways?
On the other hand, crushed gravel driveways aren’t the most attractive of driveways, although they may work fine aesthetically if you’re striving for a “folksy” look in your landscape design. Crushed gravel driveways are a mixed bag in Northern climes.
How much does a truckload of sand cost?
A load of masonry sand, river sand, or granite sand will cost anywhere from $25 to $40 per ton. One ton of masonry sand or river sand will cover roughly 35 square feet, 1 inch thick. One ton of granite sand will cover about 75 square feet, 2 inches thick.
What is the best gravel for a driveway?
Top layer choices for gravel driveways might include crushed shale, limestone, granite and concrete, along with other types of gravel in various colors to meet your aesthetic needs.