# How much does a 1/2 acre pond cost?

since a 1/2 acre pond is about 22,000 square feet we would often ballpark \$22,000. Of course this depends on terrain and how much landscaping, if any, you want to do.

As a side-note: If using it for swimming, a 1/2 acre pond should be more like 6-10 feet deep or more. You don’t want to touch bottom when the water is low in the middle of summer, or have weeds trailing up between your legs. You may fluctuate a few feet depending on available water, so aim for deeper.

Also Know, how much does it cost to dig a 1/2 acre pond? Per Square Foot & Acre Cost Calculator

Size Size in Square Feet Average Expense to Dig
10 feet x 15 feet 150 \$375-\$1,073
½ Acre 21,780 \$1,500-\$3,000
1 Acre 43,560 \$3,000-\$5,000
3 Acres 130,680 \$9,000-\$15,000

Similarly one may ask, how much does it cost to dig a 1 acre pond?

For the perfect pond site, expect to pay \$3,000 to \$5,000 per acre, permitting and dam building included. (In some cases, where the terrain is lacking suitable soil, the cost could spiral to \$10,000 per acre.)

How deep should a 1 acre pond be?

However, the average pond we dig is 12′ deep throughout and depending on the size at least one area 15′ deep. If the pond is large enough, say 1 acre we can dig a couple holes in the pond 15″ to 20′ deep and maybe 25′ round.

### How many fish can a 1 acre pond support?

All ponds have a maximum weight of fish the pond can support. In unfertilized ponds, you should be able to harvest up to 40 pounds of adult bluegill (about 120 fish) and 10 pounds of adult bass (about 8 to 10 fish) per acre per year.

### How big is a 1 acre pond?

1 surface acre consists of 43,560 square feet. To find out how our 20,000 square foot pond measures up to 1 acre we can simply divide 20,000 by 43,560. You should end up with .

### Will digging a pond lower the water table?

The water table is how high the water is in that location. Digging the pond more or less will not help change that height of the water. digging a drainage channel – a grass water way, a deeper ditch, or a burried tile to carry the water to ground that is even lower is the only way to make the water table go down.

### How long does it take to dig a 1 acre pond?

It would take him 4 to 5 weeks to complete something like a one acre pond with a large dam .

### Should I put gravel in my wildlife pond?

Adding gravel in your pond actually hides muck so it is not always visible, creates additional surface area for bacteria to accumulate in order to keep your pond muck free and provides a more natural landscape look actually brightening your pond’s bottom and helping to make your fish more visible.

### How many gallons are in a half acre pond?

VOLUME CALCULATION Example: I have a 1.25 acre pond with a 6′ average depth. 1.25 x 6′ = 7.5 acre/feet. If you are trying to figure out GALLONS, multiply acre-feet by 325,829 (gallons in 1 acre-foot) = Gallons. Example: I have 7.5 acre-feet of water.

10 feet

### How big is a quarter acre pond?

95 X 100 = 9500 square feet. Divide that by 43,560 and you get . 218 acre, or almost one-quarter acre. RECTANGULAR SHAPED PONDS – Multiply one short side (in terms of feet) by one of the long sides.

### How do you build a pond without a liner?

No pond liner needed It’s definitely possible to build a pond that is waterproof without one. We used bentonite clay to make sure the soil would retain the water. Some soils would retain the water even without this, but in most cases it would be recommended to add some to be sure that the pond doesn’t start leaking.

### How many yards of dirt are in a 1 acre pond?

Since 1 cubic yard = (1 yard)3 and 1 yard = 3 feet, that means 1 cubic yard = (3 feet)3 = 33 feet3 = 27 cubic feet. So divide this into the amount of dirt: 10 890 000 cubic feet / (27 cubic feet per cubic yard) = 40 333 cubic yards.

### How deep should a catfish pond be?

Ponds for Catfish Ponds suitable for exclusive channel catfish production should be at least eight feet deep with pond edges sloping quickly to three feet deep to reduce aquatic vegetation problems.

### How big of a pond do you need for bass?

A good fish pond should cover no less than half an acre and be six or eight feet deep over at least a quarter of its total surface area.

### How deep should a man made pond be?

Having most of a ponds depth between 10-12 feet is ideal. The ideal average water depth is 8 feet. Some people love beach areas.