How do you install a traverse rod bracket?

Step 1 Hold one end bracket up to wall. The top edge should be on the ROD HEIGHT mark and the outer edge should be on the ROD WIDTH mark. Put a pencil mark on the wall through any two holes on the end bracket base. Repeat on the opposite side of window for the other end bracket.

Generally, hanging curtain brackets on the wall above and outside the window molding looks best, since it allows fabric to fall gracefully. If you have detailed window frames you don’t want to cover, an inside mount (hanging curtains within the frame, as you would with a tension rod) can work.

can I hang regular curtains on a traverse rod? An intermediate skilled home sewer can utilize drapery maker tricks and successfully hang non–pinch-pleated drapes on a traverse rod, hiding the pins and providing enough support for the weight of the drapes. A traverse rod allows drapes to be opened and closed by pulling on a cord hanging to one side of the drapes.

In this manner, how do you hang a curtain rod without brackets?

Take one of your 3M Command hooks, take off the paper backing on the adhesive strips, and line the hook up on the wall using the pencil mark for guidance. Press it on the surface well, holding for at least 30 seconds, then let it be for at least a half hour. Repeat the same for the other side. Don’t be in a rush.

What kind of curtains fit a traverse rod?

Depending on the windows, the drapery fabric, your personal style and how you want the curtains to hang, you also need to select rodding. Decorative poles and rings or grommet curtains are good choices for some windows, but there are situations where only traverse curtain rods will do.

How do you fix a traverse rod?

How to Replace Slides for Traverse Rods for Drapes Remove your drapes or curtains from the carriers leaving the hangers, or pins, on the curtains if possible. Remove the traverse curtain rod from the mounting bracket. Place the rod on a flat surface. Flip the rod over to expose the back of the rod, the carriers and the end brackets.

How many curtain rod brackets do I need?

Count how many brackets are included with the curtain rod. As a general rule, there should be at least one bracket for each outside corner of the window, and one bracket in the center. Add more brackets if the expanse between the middle and outer brackets is more than three feet.

How are traverse rods measured?

Standard traverse rods are only used for pleated draperies. Measure the width of the rod from end to end, this is the face width or rod width. At the ends of the rod, measure the distance from the front of the rod to the wall, this is the return.

How far should Curtain rods extend past the window?

When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side, which allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window’s edges.

Do curtains need to touch the floor?

As a general decorating rule, drapes should be long enough to touch the floor. The amount of drapery material reaching the floor depends on the desired look of the curtains once they are hanging around the windows.

How far above the window should the curtain rod be?

Go High. A rule of thumb (from Architectural Digest) is that curtains should be hung between 4 to 6 inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.

How far off the floor should drapes hang?

The proper position is ½ inch above the floor for free hanging curtains. This distance allows for mopping and cleaning while creating the illusion that the curtain touches the floor.

How much does it cost to put up a curtain rod?

Cost to Install a Curtain Rod Item details Qty Low Unused Minimum Labor Balance of 2 hr(s) minimum labor charge that can be applied to other tasks. 0.0 h $0 Totals – Cost To Install Curtain Rod 6 EA $509 Average Cost per Rod $84.75

What can I use instead of a curtain rod?

Copper Pipes One of the most common things that people use as a curtain rod alternative is a copper pipe. Copper pipes are interesting because they can provide you with a very unique look. Many people are drawn to the look of copper, so using a copper pipe as a curtain rod is going to be appealing.

How can I hang curtains without drilling holes?

Here are four creative ways to hang curtains without drilling holes in your walls. Coat Hooks. Coat hooks are a surprisingly versatile tool. Kwik-Hang Curtain Rod Brackets. There are two major obstacles to hanging curtains: accurately measuring them and damaging your walls. Command Hooks. Tension Rod Curtains.

Do you need a drill to put up a curtain pole?

To fit your pole or track you will need to drill into a wall, so it’s best to check before you start that there are no pipes or cables nearby. If you’re not sure where the pipes or cables lie, use a cable detector to check the area first.

Where should curtain brackets be placed?

Each bracket should be placed at the height you previously determined and about four to six inches from the side of the window frame. (This will allow you to open the curtains completely.) Check to make sure your pencil marks are level otherwise the entire window treatment will be crooked.