How do you cut a vertical blind rail?

Even though it may take longer, we recommend cutting the slats one by one to make them the same. You can only shorten vertical blinds from the top of the slat, because you need to use the folded pockets for the bottom weights, which keep the blind in place.

The quick and dirty way to shorten a vertical blind

  1. Remove each slat from the headrail.
  2. Remove the weight.
  3. Find the back of the slat.
  4. Cut across one side of the pocket, to create one length.
  5. Measure the length and mark where you now want the bottom to be.
  6. Fold your slat and measure the length again, to be sure it’s correct.

Likewise, can I cut vertical blinds to fit? Even though it may take longer, we recommend cutting the slats one by one to make them the same. You can only shorten vertical blinds from the top of the slat, because you need to use the folded pockets for the bottom weights, which keep the blind in place.

Also Know, how do I take apart my vertical blinds?

If the blind is mounted with brackets, remove the vertical blinds from the brackets by pushing on the tab on the back of the bracket. Release the headrail while pushing the tab by swinging the back of the headrail down. Once the back if the headrail is off the bracket, remove the front side.

Can you adjust the width of vertical blinds?

Reducing the width of vertical blinds Do this on the side without any cords or operating mechanisms. Push all blind holders to the opposite side of the headrail, so they are not in your way. You can then measure how long you need the headrail to be, and mark on the headrail the amount you need to remove.

Can you cut blinds that are too wide?

Cutting down the slats If the slats are too wide use a powered saw of some kind. If you are using a hand saw try using a hacksaw rather than a standard carpenters saw. Just remember that in order to do a good job you must take your time and go slow. Align the slats so that they are even.

How do you cut a Venetian blind headrail?

Cut the blind headrail using a hacksaw or tin snips. Remove the metal end stiffener bracket from the side(s) you are cutting. Use the hacksaw or tin snips to cut the headrail per your measured mark. File any rough edges with a metal file. Replace the metal end stiffener onto the newly cut headrail.

How do you shorten vertical blind cords?

How can I shorten my vertical blind control cord? Look inside the headrail and find the vane carrier where the cord ends in a knot. Hold that vane carrier and pull out the excess cord until the cord safety device reaches the desired height. Tie a knot in the cord at that position. Tighten the knot and cut the cord 1/2″ below the knot.

How long should vertical blinds be?

A common rule of thumb is to ADD 2 inches to the length of the vertical blind. In other words measure from the floor to 2 inches above the moulding. If you have no moulding measure from the floor to 2 inches above the top of the opening.

How long should blind cords be?

maximum cord and chain lengths – must end 1.5 metres above the floor.

Can Roman shades be shortened?

How to Shorten Roman Shades. A roman shade will add a touch of style and elegance to any room. If you have roman shades that you love but they don’t fit the length of your window, you can easily make an adjustment and provide some cost effective budget decorating.

Can you cut Levolor blinds?

Levolor manufactures window coverings including vertical blinds, cellular shades, and roller shades. Whatever the reason, most types of wooden Levolor blinds that come in slats can be cut to the correct width with a few tools.